Inner Keel Tube Bush Pair - Old Pro V2
Share this page: Facebook LinkedIn Twitter
Inner Keel Tube Bush - Old Pro V2
BMI0056
Inner Keel Tube Bush - Pro The Bushes on the newer karts do not need any fasteners. The Inner (Rear) bush is held in place by the spring button, if you remove the spring button with some long nose pliers and the bush should just pull out. The outer (front) bush has 2 locating buttons on the inside that locate into the holes on the keel tube, you will need to use a couple of flat screwdrivers to slightly lift the plastic tabs then it should slide off.
$5.41 NZD